NORDOCK Mechanical Leveler


Short Form Specifications

Model* Width Length

* Add capacity required from 20,000 to 50,000 lbs. Example: NM-66-35.


The platform is a unitized welded structure with continuous welds at the beam, header plate and lug connections for maximum strength. The deck plate, lip plate, beam sections and lugs are constructed of minimum 50-55,000 PSI yield material. A standard center deck beam and welded side guards provide additional deck plate support. The continuous rear hinge provides 4" of side-to-side tilt with no pinch point. The frame has seven solid steel rear supports, an open design for pit cleaning, and a night lock that prevents illegal entry when the door is closed. The front and rear hinge rods are SAE 1045 material, zinc plated and factory coated with anti-seize lubricant.


The operator releases the holdown at the rear of the platform until the deck is raised and stopped. The operator walks the platform down extending the lip onto the truck bed. The deck will float up and down with the truck during loading. The standard 16" long lip will extend out and engage a truck bed 12" above and below floor level.


NORDOCK guarantees that the INDUSTRIAL™ Series Dock Levelers will perform as described and to the full satisfaction of the purchaser for one-year from date of receipt or NORDOCK will repair, replace or remove the product and refund the purchase price. In addition, structural components are guaranteed for ten years under specific guidelines. All NORDOCK Dock Levelers are designed to exceed the requirements of ANSI MH14.1 1984-87 and properly applied comes with a 10 year structural warranty.

Phone: 905-697-4276
Toll-Free: 1-866-885-4276
Parts: 1-866-885-4276
Fax: 905-697-6422

Version française

This document is copyright © 2004-2018 NORDOCK®.