OPERATION
Simple push button controls enable the operator to raise and lower the ramp as well as control the extending and retracting of the lip at any time during operation for quick cycles and end load access. Dual maintenance stands for the decks are provided for added security & convenience.
CONSTRUCTION
The platform is a unitized welded structure with continuous welds at the beam, header plate and lugs for maximum strength. Beams are welded to the deck plate on both sides in a superior 33% weld pattern along their full length.
The deck plate, lip plate, beam sections and lugs are constructed of minimum 55,000-PSI yield material. The continuous rear hinge with stainless steel rod provides 4″ side- to-side tilt with no pinch point and comes factory coated with anti- seize lubricant.
High visibility 4″ high side run-off guards are welded to each side of the ramp assembly. A mechanical safety latch supports the ramp in its vertical stored position. The front and rear hinge rods are SAE-1045 material, zinc plated, and factory coated with anti-seize lubricant.
ELECTRICAL/HYDRAULICS
External wall or stand-mounted totally enclosed non-ventilated 1.5 HP power unit available in all voltages. NEMA 12 dust tight control panel with motor starter, push button controls, emergency stop and operator instructions on hinged cover.
SYSTEM INTEGRATION
Various equipment integration systems are available to provide a safe sequence of operation. The dock leveler, door, vehicle restraint, air seal and communication lights should all be integrated to ensure an optimum safety system.
WARRANTY
NORDOCK® guarantees the TLHR TELESCOPING-LIP™ hydraulic dock levelers will perform as described and to the full satisfaction of the purchaser for one-year from date of receipt.
In addition, under specified guidelines a 10-Year structural, 5-Year Hydraulic and 20-Year hinge warranty are included. Consult your NORDOCK® representative for assistance in choosing the correct capacity and options for your application.
