OPERATION
The operator raises and lowers the ramp with constant control of the push buttons. The lip can be extended and retracted at any time for quick cycle. Deck maintenance support with lock-out provided for improved safety and convenience.
CONSTRUCTION
The platform is a unitized welded structure with continuous welds at the beam, header plate and lugs for maximum strength. Beams are welded to the deck plate on both sides in a superior 33% weld pattern along their full length.
The deck plate, lip plate, beam sections and lugs are constructed of minimum 55,000 PSI yield material. The continuous rear hinge with stainless steel rod provides 4″ side-to-side tilt with no pinch point and comes factory coated with anti-seize lubricant. High visibility 4″ high side run-off guards are welded to each side of the ramp assembly.
ELECTRICAL/HYDRAULICS
External wall or stand-mounted totally enclosed non-ventilated 1 HP power unit available in all voltages. NEMA 12 dust tight control panel with motor starter, push button controls, emergency stop and operator instructions on hinged cover.
Hydraulic cylinders are a heavy-duty design with polished chrome rods, guide bearings, high-pressure seals, and velocity fuses. The hydraulic hoses are SAE 100R2 with permanent fittings attached.
WARRANTY
NORDOCK® guarantees that the XTRA-WIDE™ series of hydraulic dock levelers will perform as described and to the full satisfaction of the purchaser for one-year from date of receipt.
In addition, under specified guidelines a 10-Year structural, 5-Year Hydraulic and 20-Year hinge warranty are included. Consult your NORDOCK® representative for assistance in choosing the correct capacity and options for your application.
