OPERATION
The operator presses the control button until the deck is raised and the lip is fully extended. Releasing the button allows the lip to lower onto the truck bed. To store the leveler, the operator presses the raise button until the lip fully retracts, then releases to allow the leveler to lower into its stored position.
The standard 16” long lip projects 11” beyond a 4” bumper to engage a truck bed 12” above or below the floor level.
CONSTRUCTION
The platform is a unitized welded structure with continuous welds at the beam, header plate and lugs for maximum strength. The deck plate, lip plate, beam sections and lugs are constructed of minimum 55,000 PSI yield material. A standard center deck beam and welded side guards provide additional structural support.
The continuous rear hinge provides 4” of side-to-side tilt with no pinch point. The 19” high frame has six solid steel rear supports, an open design for easy pit cleaning, and lip supports that prevent illegal entry when the door is closed.
The front and rear hinge rods are SAE 1045 superior shaft, zinc coated with factory applied anti-seize lubricant.
ELECTRICAL/HYDRAULICS
Frame mounted power unit with 1 HP totally enclosed non-ventilated motor, available in all voltages. NEMA 12 dust tight metal panel enclosure with hinged cover, motor starter and single push button control.
The regenerative hydraulic cylinders are a heavy-duty design with polished chrome rods, guide bearings and high-pressure seals. The hydraulic hoses are high-pressure SAE 100R2 with permanent fittings attached.
WARRANTY
NORDOCK® guarantees that the HEAVY-DUTY™ Series of hydraulic dock levelers will perform as described and to the full satisfaction of the purchaser for one-year from date of receipt or NORDOCK® will repair, replace or remove the product and refund the purchase price.
In addition, the front and rear hinge assemblies are guaranteed, under specified guidelines, for a period of twenty-years. All NORDOCK® dock levelers are designed to exceed the safety and performance requirements of ANSI MH30.1 – 2007 and when properly applied comes with a 10-year structural warranty and 5-Year Hydraulic.
